DIYEFI.org Forum

so i take it i will have to run 3x fuel outputs and 3x spark outputs for wasted right witch i dont mind ? i will need to wire everything as 6x spark and 6x fuel on the ecu connector side for the wiring harness ~ this may be interesting getting tired ~ i did find a company selling VNP20N07-E for $1.6...

Thanks for such a fast reply! I added most the parts from the DFH BOM So those resistor values that are common im going order 30-100 each depending on price. ( Also can they be 1/4watt ? ) the VNP20N07 comes with an added 20$ handling charge how many will be needed? Following ravage the smd version ...

i will be looking at doing a TA card build soon. Looking for parts to start stocking up on, parts like most used components. ( Resistors , Capacitors, Diodes and IC's ) you know things that you may use 20+ of would be nice.i plan to order allot asap. ~ my local supply store is limited and expensive....

interesting i have 2x siemens bmw ecu's ( from odb2 328i's) if you would like pictures of those , overall it looks about the same except it has an aluminum block that goes around the ecu , kinda like a heat pipe on a laptop ~same 88 pin connector ( transmissions also share the same connectors but ke...

Just want to point out Ford made a crown vic that ran off cng .... the injectors are rated for 1600 cc or 160 lbs so i take it you need allot more natural gas then regular gas / but these injectors work nice on modified turbo application plus you can source them new or rebuilt cheaper them most raci...

I plan to run E85 in my setup so support for it is nice, also support for any other fuels like natural gas might be nice too. its also possible to make your own E85/E100 for some people it can get pretty cheap. it also offers some nice advantages for turbo setups. an ability to tune for pure gas ( w...

i would be interested in a board as long as its mostly complete ( never messed with smd stuff so ) i would plan to run it on my bmw and maybe many others if it helps with development ~ and very interested in spin 2 and through hole board diy setups ~