Page 1 of 1

FreeEMS 0.1.0 UltraJizz has been released!

Posted: Wed May 26, 2010 7:34 am
by Fred
Yes, you heard right, I've released UltraJizz, it's been a long time coming!

UltraJizz is a closer relative to the very first FreeEMS firmware to run an engine, and includes a copy of the exact code and tune that did, and instructions explaining how to recreate that build.

From the git tag message:
The 20th release of FreeEMS Vanilla and the first from the 0.1.X series!

This version is the first one to run an engine! Many thanks to Aaron Barnes and Rob Ebersol for writing the tuner and doing the tuning respectively!
I recommend reading the release notes below as they contain a short version of my US trip:

http://docs.freeems.org/releases/0.1.0- ... Notes.html

The changes between the previous release, 0.0.19, and this one are listed here:

http://docs.freeems.org/releases/0.1.0- ... eLogs.html

Fully anotated and cross referenced source documentation:

http://docs.freeems.org/releases/0.1.0- ... tml-1.5.6/

File downloads:

http://download.freeems.org/releases/freeems-0.1.0/

Included are :

doxygen-html-1.5.6.zip - older doxygen version, but with images/callgraphs/depgraphs.
doxygen-html-1.6.3.zip - newer doxygen version, but without any images.
firmware/ - each variant of the firmware with md5 and sha1 checksums
freeems-0.1.0-docs.zip - the docs directory in a zip.
freeems-0.1.0-src.zip - just the source, nothing more.
freeems-0.1.0.zip - the entire source tree, as previously released.

You can also get a live copy by cloning my git repository and running the following command:

git checkout 0.1.0-UltraJizz

Finally, some explanation of the name is probably in order :

Firstly, we needed a catchy slogan "UltraJizz, it's been a long time coming!" seemed good.
Secondly, everybody who is anybody knows that UltraJizz > MegaJizz :-)
Thirdly, UltraJizz, because UltraMegaJizz was never going to cum! Urrr, I mean, UltraJizz, because UltraMegaSquirt was never going to come!

Onwards and upwards! :-)

Fred.

Re: FreeEMS 0.1.0 UltraJizz has been released!

Posted: Wed May 26, 2010 10:08 pm
by jharvey
Nice, and good work.