Open Source Wideband Display
Posted: Wed May 06, 2009 12:37 am
Hi,
I am making an open wideband display. The project is composed of 2 parts; a driver and a display. The driver is based on an attiny861, the display is based on a 4 digit 7 segment LED display. A ribbon cable connects the display to the driver. The driver gets the AFR signal from the analog 0-5v linear voltage output from your wideband controller.
Display:
Driver
Youtube video
http://www.youtube.com/watch?v=1gRm6s8TN2Q
I will publish the firmware, schematics, and PCB gerber files shortly on my website. I will also sell complete DIY kits with all components for $30.
Regards,
Alan To
I am making an open wideband display. The project is composed of 2 parts; a driver and a display. The driver is based on an attiny861, the display is based on a 4 digit 7 segment LED display. A ribbon cable connects the display to the driver. The driver gets the AFR signal from the analog 0-5v linear voltage output from your wideband controller.
Display:
Driver
Youtube video
http://www.youtube.com/watch?v=1gRm6s8TN2Q
I will publish the firmware, schematics, and PCB gerber files shortly on my website. I will also sell complete DIY kits with all components for $30.
Regards,
Alan To