http://www.msextra.com/forums/viewtopic ... 67&t=55277
Using better design for TPIC8101 is not ok !
Re: Using better design for TPIC8101 is not ok !
nothing is ok in the MS world...
Re: Using better design for TPIC8101 is not ok !
http://m.youtube.com/watch?v=u5CVsCnxyXg
It's behaviour exactly like this that you can thank for the existence of DIYEFI.org and the FreeEMS project!
It's behaviour exactly like this that you can thank for the existence of DIYEFI.org and the FreeEMS project!
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- QFP80 - Contributor
- Posts: 34
- Joined: Sun Apr 14, 2013 8:50 am
- Location: Australia
Re: Using better design for TPIC8101 is not ok !
I think it's even sillier than that.
Correct me if I'm wrong, but the OP in the thread is wanting to use the knock module on another project or system not bring something to the MS3
so there would be no dilution to the MS3 environment, just at least one extra sale of the JSM module
So...
Correct me if I'm wrong, but the OP in the thread is wanting to use the knock module on another project or system not bring something to the MS3
so there would be no dilution to the MS3 environment, just at least one extra sale of the JSM module
So...
Steve
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
1981 Porsche 928S Bosch KE3-Jetronic Injection with FrankenCIS http://www.FrankenCIS.com
Re: Using better design for TPIC8101 is not ok !
Ha! You're right! Shows you how far they'll go to protect their core business! :-) One sale doesn't matter, provided that we can stop the pirates! :-D
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- QFP80 - Contributor
- Posts: 57
- Joined: Tue Feb 12, 2013 5:43 am
- Location: Scarborough, ON
- Contact:
Re: Using better design for TPIC8101 is not ok !
Forgive my ignorance - is the HIP9011 circuit shown above useable without the SO/SI pins? Can they be eliminated from the circuit? The datasheet says they have internal pull-ups, but I just had a graphic demonstration on a prototype of my own on why you can't always trust such beasts.
Is the HIP9011 / TPIC8101 etc useable 'out of the box', or does it require some programming via the SO/SI pins, or other means?
Is the HIP9011 / TPIC8101 etc useable 'out of the box', or does it require some programming via the SO/SI pins, or other means?