New BrickRPM Dual VR Conditioner Board!
-
- TO220 - Visibile
- Posts: 5
- Joined: Thu Mar 21, 2013 5:15 am
Re: New BrickRPM Dual VR Conditioner Board!
Ok thanks...and one more question..I would like to use the board to clean the signal to an aem fic ..do you have any knowledge on mounting the chip inside the unit to get the 5v power supply or will I hv to get the board with it own 12 v supply?
Re: New BrickRPM Dual VR Conditioner Board!
I have no idea about the AEM stuff, but if you can find the power supply circuitry and find a reliable 5V source, it should be fine to wire it up like that, yes.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- TO220 - Visibile
- Posts: 5
- Joined: Thu Mar 21, 2013 5:15 am
Re: New BrickRPM Dual VR Conditioner Board!
Cool..you all deal with the mega squirt stuff??
Re: New BrickRPM Dual VR Conditioner Board!
MegaSquirt stuff is a repressed memory for me :-) http://en.wikipedia.org/wiki/Repressed_memory
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- TO220 - Visibile
- Posts: 5
- Joined: Thu Mar 21, 2013 5:15 am
Re: New BrickRPM Dual VR Conditioner Board!
Lolzz..hmm...you still make the vr boards???
Re: New BrickRPM Dual VR Conditioner Board!
I have limited stock of them left, and will be assembling those soon. I think there should be one spare for you, if you need it.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- TO220 - Visibile
- Posts: 5
- Joined: Thu Mar 21, 2013 5:15 am
Re: New BrickRPM Dual VR Conditioner Board!
Ok cool..am gonna hook up the fic nd see wats happening...your from spain right...(Shipping)
Re: New BrickRPM Dual VR Conditioner Board!
I'm from NZ. Shipping: http://brickems.com/brickrpm/shipping/
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- TO220 - Visibile
- Posts: 14
- Joined: Thu Mar 28, 2013 6:53 pm
Re: New BrickRPM Dual VR Conditioner Board!
Hey Fred,
I am building up a Megasquirt 2 system for my 76' 280z and trying to use the stock VR sensor but am having problems with noise and not to mention the horrible MS VR conditioner.
I was wondering if I could purchase one of your VR conditioners to mount inside the box. Hopefully it would fix the problems I am currently having.
I am building up a Megasquirt 2 system for my 76' 280z and trying to use the stock VR sensor but am having problems with noise and not to mention the horrible MS VR conditioner.
I was wondering if I could purchase one of your VR conditioners to mount inside the box. Hopefully it would fix the problems I am currently having.
Re: New BrickRPM Dual VR Conditioner Board!
You're probably in luck. I'm going to put together the final handful of the last batch over the next week or so. It'll be first in first served, but there should be enough. After those are gone, though, I want to make some design tweaks to the board, and improve my process before I make any more. It's too slow and human-error prone at the moment.
I've de-noobed you, btw, so you can post freely now.
It's amazing to me how many people have found the website considering it's only linked here and on facebook. I'll have to pick up my game so as to not disappoint the random fans :-)
Fred.
I've de-noobed you, btw, so you can post freely now.
It's amazing to me how many people have found the website considering it's only linked here and on facebook. I'll have to pick up my game so as to not disappoint the random fans :-)
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!