buenas noches desde argentina.
soy fera .. user. assembler. and programer de megasquirt 1 y 2.
estoy entrando en el tema de la programación de controladores .así que tengan paciencia por favor
en esto soy nuevo
tengo problemas para poder interpretar como cargar y de donde sacar el .s19 file.. y que tipo de programador necesito. si un bdm. o que?. tengo el xprogM. si puede servir. mejor
muchas gracias por su atención. en cualquier cosa que pueda serles útil . aquí estoy
fred . lei que lees bien el español pero te cuesta escribirlo.
lo mismo ami me sucede con el ingles
leo bien . escribo mal.
regards
Fera
sponsored by GOOGLE TRANSLATE
goodnight from Argentina.
I am fera .. user. assembler. and programer megasquirt 1 and 2.
I'm going into the issue of programming controllers .so please be patient
I'm new in this
I have problems to interpret how to load and where to get the file .S19 .. and what kind of programmer need. if a bdm. or what?. I have the xprogM. if I can use.
thank you very much for your attention. anything that may assist them. I'm here
fred. I read that you read Spanish well but you have trouble writing it.
the same thing happens with my English
I read well. but bad write.
regards
Fera
a little question
Re: a little question
Double post! Leaving both this time. The other is here: viewtopic.php?p=42726#p42726
Answering tech here:
BDM is necessary if you have a bare chip on a board you've built or an incompatible SM on a development board.
If you get hardware from Andy with a working SM on it, then you do not need a BDM.
If you do need a BDM, Andy sells those too.
S19s are available for testing/playing around, but for your car we'll need to create one for you with your help. For testing/playing, here: http://builds.freeems.org/
I hope that helps. Espero que eso ayude.
Saludos cordiales,
Fredito.
Answering tech here:
BDM is necessary if you have a bare chip on a board you've built or an incompatible SM on a development board.
If you get hardware from Andy with a working SM on it, then you do not need a BDM.
If you do need a BDM, Andy sells those too.
S19s are available for testing/playing around, but for your car we'll need to create one for you with your help. For testing/playing, here: http://builds.freeems.org/
I hope that helps. Espero que eso ayude.
Saludos cordiales,
Fredito.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: a little question
muchas gracias fred y perdón por postear mal..
me has sido de mucha ayuda
lo que yo estoy intentando hacer -es programar el controlador. y también poder hacer un firmare o un .s19
con el correr del tiempo. vamos a ver que sucede- si se puede o no.
saludos. fera
me has sido de mucha ayuda
lo que yo estoy intentando hacer -es programar el controlador. y también poder hacer un firmare o un .s19
con el correr del tiempo. vamos a ver que sucede- si se puede o no.
saludos. fera
Re: a little question
No es un problema, y no te preocupes, y de nada por todo! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!