All tables referenced by RPM versus Load except where noted.
- VE tables
- 2 banks of tables for table/fuel switching (any reason to have 3+?)
- 2 tables per bank for V/boxer/twin/siamese/etc use (other uses needing more than 2?)
- Ignition advance
- 2 banks of tables for table/fuel switching (any reason to have 3+?)
- 2 tables per bank for V/boxer/twin/siamese/etc use (other uses needing more than 2?)
- Fuel advance * 4 (v/boxer/twin/sia/etc * 2 X staged injection * 2)
- Lambda * 2 (table/fuel sw)
- Explicit 3d dwell table * 1 (RPM versus Voltage)
Limitations of space (which you don't really need to know about) :
32 - 8 = 24
24 / 1 = 24 (duh) conventional tables able to be paged through 6 window slots 4 at a time
However, if we go to a points based system later, it might be better to use more space for the structure at which point it could become 12 or 6 big tables. Of course, not all of them NEED to be that type (only advance and VE really)
Go nuts!
Fred.